15-10-9 landscaper pack for Trees & Shrubs.
Spike Specifications
Tree & Shrub Spikes
|
Nitrogen (N) |
15% |
15% Ammoniacal Nitrogen |
|
Phosphate (P205) |
10% |
Soluble Potash (K²O) |
9% |
Sulfur (S) |
10% |
10% Combined Sulfur
|
|
Derived From: Ammonium Phosphates, Ammonium Sulfate, Potassium Chloride |
Treatment
Apply twice a year when the ground is soft and moist. If the ground is dry, wet the desired location before driving spikes. For second application drive spike 1 ft. from previous setting. Apply only as directed.
- Place plastic cap on top flat portion of the spike.
- Hammer spike into the ground 2 in. below the soil surface following the drip line. Protective eyewear recommended.
- Spikes should be at least 3 ft. apart. For smaller trees with a drip line closer than 2 ft. insert spikes 2 ft. away from the center of the tree.
- Be sure to remove and save plastic cap for use with remaining spikes.